Ward Leonard Speed Control System for a DC Motor
As a very flexible, reliable means of motor speed control, the Ward Leonard System is unmatched.
Ward Leonard Speed Control System
The system is made up of a driving motor which runs at almost constant speed and powers a dc generator as shown in the diagram. The generator output is fed to a dc motor. By varying the generator field current, its output voltage will change. The speed of the controlled motor thus can be varied smoothly from zero to full speed.
Since control is achieved through the generator shunt field current, the control equipment is required only for small current values. A potentiometer or rheostat in the generator field circuit enables he variation of output voltage from zero to the full value and also in either direction. The controlled motor has a constant excitation. Its speed and direction are thus determined by the generator output.
Depending upon the particular duties of the controlled motor, series windings may be incorporated in the field of the motor and also the generator. This may result in additional switching to reverse the controlled motor depending upon the compounding arrangements.
The driving motor or prime motor for the Ward Leonard System can be a dc motor, an ac motor, a diesel engine, etc. Any form of constant and almost constant speed drive can be used, since its function is only to drive the generator.
0 comments:
Post a Comment